Products Obserview Rear Vision System System Packages
CS70047L/CS70047D


Obserview System package:CS70047L/CS70047D Catalog:
 
SPECIFICATIONS
    Model NO.CC-47-D (or L) Camera
    Pick-up Device1/3" image sensor interline transfer CCD
    Image Size4.82 x 3.64mm
    ElementsNTSC:510(H) x 492(V) PAL: 500(H) x 582(V)
    Horizontal ResolutionMore than 380 TV lines
    Shutter ControlNTSC: 1/60~1/100,000sec. PAL: 1/50~1/100,000sec.
    Scanning System2:1 interlace
    SynchronizationInternal
    S/N RatioMore than 48db (AGC OFF)
    Gain ControlAUTO
    Sensitivityo lux/F1.2 By IR LED
    Video OutputComposite 1.0 Vp-p/75 Ohm
    White BalanceAUTO
    Power Consumption3w (Max)
    Dimension104.6mm(D) x 62mm(W) x 62mm (H)
    Weight (per unit)650g
    Scanning FrequesncyH: NTSC: 15.750 KHz /PAL: 15.625KHz
    V: NTSC: 60Hz / PAL: 50Hz
    DC Power SourceDC9~12V
    Lens MountBoard lens 2.5mm/F2.5
    Lens View Angle115.5 degree
    IR LED Type850nm/Auto control by CDS
    Lens View Angle115.5 degree
    IR LED ONUnder 35~50 lux
    IR LED Project Distance5 Meters MAX
    Operation Temp.-10 to 50 C (14 to 122 F)
    Storage Temperature-30 to 60 C (-4 to 158 F)
SPECIFICATIONS
    Model NO.CM-700
    Display7" active matrix TFT-LCD (16:9)
    Back LightBuilt-in CCFL
    Dot Format1440(H) x 234(V)
    Dot Pitch0.108mm(H)x0.375mm(V)
    Brightness300 cd/m2 (Nit)
    Viewing angles65/65/40/65 degrees (L/R/T/B)
    Pixel configurationStripe
    Power requirements12 VDC for monitor
    13-24 VDC for control box
    Video signal1V p-p (positive) 75 ohms.
    Video systemNTSC/PAL Auto Detection
    Operating temperature0~50 C
FEATURES (for TFT-LCD Monitor)
  • OSD (On Screen Dsiplay) control for: Color, Tint, Brightness, Contrast and Mirror (for Camera Mirror/Front View switch)
  • Wireless IR Remote Control
  • NTSC/PAL Signal Auto Detection
  • Audio Speaker is included
FEATURES (for Control Box)
  • 2 Camera inputs, CCD 1 is default CCD 2 for Reverse Operation.
  • 2 Audio/Video Output for recorder
  • Auto switch from default CCD 1 input to CCD 2 input source to check view behind the car (AUTOMATIC MIRROR VIEW IN MONITOR) while driver set the gear to Reverse.
  • Monitor auto power on while Reverse Gear Signal detected
 
*Design and Specifications are subject to change without notice.
Call Toll-Free: 1-(800)731-9972COPYRIGHT 2003-2004 WYSCO PRODUCTS. ALL RIGHTS RESERVED