System:
- 1-chnnel video input and 1 channel audio input
- Real video display
- Video loss detection
- Alarm input supported
- Motion detection
- Storage:2.5GB H.D and Compact Flash Card (CFC)
- One audio record supported
- OSD menu
- Remote control through RS-232 (one port)
- USB: Mass storage class
- One drive at the same time, priority: H.D. > CFC
Image Playback:
- Date/Time searching supported
- Record Date/Time display
- Fast forward (X2, X4)
- Backward (X1,X2,X4)
- Freeze function
- Audio output can be ON or OFF
Key Functions:
- Manual Trigger
- REC: Enter Record Model
- STOP: Exit Record mode(into Display only mode)/Exit from Playback mode
- PLAY: Enter Playback mode and playback the last image file
- PAUSE/FREEZE: In playback mode, play will be paused or/and playback next frame
- MENU/ENTER: Enter OSD Menu
- UP: Select previous menu item
- RIGHT/FF: Change the current menu item value or Fast forward in playback mode
- DOWN: Select next menu item
- Left/BW: Change the current menu item value or back ward in Playback mode
Image Record:
- Compression: Motion JPEG
- File format: FAT32/AVI file
- Function:
(1) Resolution: 360*240 / 720*240
(2) Compression frame rate changeable
360*240:1 - 15 fps
720*240:1 - 10 fps
Note: decompression speed maybe slower tha copression.
(3) Audio recording can be ON or OFF
Operation:
- Display only mode: Recording action is stopped, live video is displayed.
- Record mode: Normally, the recorded images are stored in hard drive. If alarm input is
triggerred or MANUAL TRIGGER key is pressed, 2MB images before this event and 5.5MB
images after this event will be saved into Compact Flash Card. And the card wiil
be locked (no more writing) until unlock action is performed.
- Playback mode: Playback from H.D or Compact Flash Card
|
Remote Control Command (RS-232:RXD/TXD/GND) |
COMMAND
MANUAL TRIGGER
PLAY
PAUSE/FREEZE
STOP
REC
MENU/ENTER
UP
RIGHT/FF
DOWN
LEFT/BW
|
CODE
'A'
'B'
'C'
'D'
'E'
'F'
'G'
'H'
'I'
'J'
|
OSD Menu:
- Press key MENU/ENTER to enter or exit MENU SETUP mode
- Press key UP/DOWN to select current setup item(green words or flash)
- Press key RIGHT/LEFT to select setup data
|
| MENU PAGE 1 | * default |
SET TIME
RECORD TIME DISPLAY
AUDIO RECORD
AUDIO OUT
MOTION DETECT RECORD
MOTION DETECT SENSITIVITY
|
Y00/M00/D00 H00:M00:S00
*ON/OFF
*ON/OFF
*ON/OFF
*OFF/ON
*HIGH/MID/LOW
|
|
| MENU PAGE 2 | * default |
RESOLUTION
HDD RECORD FRAME RATE
HDD RECORD RECYCLE
RS232 BAUD RATE
VIDEO TYPE
FLASH STATUS
SYSTEM DEFAULT
|
*HIGH/MID/LOW
*001 FRAME/SEC
*ON/OFF
*9600/1200/ 2400/4800
*NTSC/PAL
*LOCK/UNLOCK
ENTER
|
|
| MENU PAGE 3 | |
SET PASSWORD...
HDD FORMAT...
EXIT (NOSAVE/SAVE)
|
ENTER
|
|
PLAYBACK POP-UP SELECT
PLAYBACK FROM HDD
PLAYBACK FROM FLASH
SEARCH
EXIT
|
ENTER
ENTER
ENTER
ENTER
|
|
|